(Summary description)How to improve the application deadline of the jigsaw puzzle is a difficult point that many customers want to understand, but they only know one thing and don't know the other. To improve the application deadline of the jigsaw puzzle machine, the operation process and the geographical environment of the application are also concerned. Let's analyze it in detail below!
How to improve the application deadline of the jigsaw puzzle is a difficult point that many customers want to understand, but they only know one thing and don't know the other. To improve the application deadline of the jigsaw puzzle machine, the operation process and the geographical environment of the application are also concerned. Let's analyze it in detail below!
Difficult problems when using the jigsaw machine
1. When the jigsaw machine rotates, the suspension system cylinder must be returned to both sides of the fixed support operation panel in advance.
2. It is strictly forbidden to clamp the concrete and press it on the material iron rack to rotate forward again to avoid major machinery and equipment violations and production accidents.
3. The wood block and other obstructions of the interior space design are removed clean and tidy, so that the jigsaw machine can run successfully.
4. The gas supply of the gas circuit should be used in conjunction with the electrical products.
5. Adjust the one-way throttle valve to ensure that the material holder and cylinder are at the same time, otherwise it will seriously threaten the service life of the cylinder.
6. The first time the board jigsaw machine should keep the balance of the mechanical equipment cutting, and splice one row every other row. After all the pages are assembled, the board is removed and the board jigsaw lifts the mechanical equipment application deadline.
Geographical environment of the jigsaw machine
1. Relative air humidity temperature: The air humidity of the operating gas of the splicing machine should be in the range of 30 to 90%; the operating temperature should be 0-45 ℃, and the temperature change specification should not lead to cold doubts.
2. The value of dust concentration cannot exceed 10mg/m3.
3. Environmental quality: no salt, acid gas, corrosive acetylene gas, combustible gas and organic waste gas.
4. Avoid changes in operating temperature caused by direct sunlight or heat convection splicing machines.
5. The installation position should bypass the vibration source.
6. The installation position should bypass flammable materials.
7. There should be no conductivity dust in the splicing machine workshop.
8. There should be no corrosion in the rain and snow days in the jigsaw machine workshop.
9. The ground is level, cleaned, and there is no dirt.
10. The aisles are smooth and there are no obstructions.
11. The light source in the room is sufficient, and all the normal operation processes in the processing cannot be harmed.
12. The opened pneumatic control valve supplies machinery and equipment.
13. The power transformer overcurrent protector opened.
Post time: Mar-18-2021