(Summary description)The carpenter splicing machine is a splicing machine, a unique piece of machine equipment, used to solve furniture, handicrafts, kitchen cabinets, log doors and control panels. The machine and equipment occupies a small area, the actual operation is simple and convenient, and the application is strong. , It is reasonable to increase productivity, increase efficiency and labor efficiency.
The carpenter splicing machine is a splicing machine, a unique piece of machine equipment, used to solve furniture, handicrafts, kitchen cabinets, log doors and control panels. The machine and equipment occupies a small area, the actual operation is simple and convenient, and the application is strong. , It is reasonable to increase productivity, increase efficiency and labor efficiency.
The principle of the carpenter's jigsaw machine: apply glue in the middle of the plastic plates to be bonded, and then press it down according to the physical method. After 3-5 hours, they were steadily dry and the whole process of handling the consignment proceeded.
The operation process of the carpenter jigsaw machine has the following aspects:
1. Dispense glue on the control panel to be assembled (the actual effect of double-sided glue dispensing on the dispensing surface will be better)
2. According to technical standards, place the board on the table.
3. Prompt to drive the valve, lightly press the load-bearing beam down to make it flat and fix the plate.
4. Use puzzle picture clips to clamp to the board (each board must have 3 puzzle picture clips)
5. Reset the pull valve and press the load-bearing beam upward to loosen the plate.
6. Remove the board and wait for it to be dry
7. Repeat the process 1-6 to carry out the work of the batch jigsaw machine.
Post time: Mar-18-2021