(Summary description)The wood produced by the laminated timber equipment maintains the material properties, has the same physical and mechanical properties as the wood, and has a more stable shape than solid wood and is not easily deformed. It is suitable for processing various furniture parts. So how to do the corresponding maintenance work during use?
The wood produced by the laminated timber equipment maintains the material properties, has the same physical and mechanical properties as the wood, and has a more stable shape than solid wood and is not easily deformed. It is suitable for processing various furniture parts. So how to do the corresponding maintenance work during use?
Generally, the temperature difference in the workplace is 25°C (±5°C), and the humidity difference is 50% (±10). Carefully read the operating instructions, and the operation, use and maintenance related to the glulam equipment. Ensure that the equipment and its surrounding environment are clean and cleaned regularly. In particular, check the rust of the monolithic equipment caused by the surrounding factors, and clean it in time. Regularly check the buttons, circuit boards, electrical appliances, etc. for overheating and abnormal noise, and check whether the instrument and computer display are normal.
In order to ensure the normal use of skidding equipment in production, it is recommended that you maintain the equipment regularly to reduce the frequency of mechanical failures and improve work efficiency.
Operation of automatic high frequency jigsaw
1. For the requirements of the staff, they must be well-trained and familiar with each component of the equipment and operating specifications.
2. To adjust the clamp to the correct position, it can be adjusted by hand.
3. Once in the process of operation, if you encounter an emergency or the track cannot turn, you must stop the operation of the equipment and wait for the equipment to start and operate normally.
4. The pressure should be adjusted to six air pressures according to the technical operation manual, the torque generated by the equipment is moderate, and the plate lock should not be too tight to avoid glue overflow or glue failure.
5. After the operation is completed, the press frame moves to the initial position, and the control switch is turned to the "off" state.
Post time: Mar-18-2021